Panasonic AJ-SD965 - Manual (Page 52)

52
Setup menus
(continued)
The underlined items indicates the initial setting.
USER menu <VIDEO>
No./Item Description
621
CCR MODE
This selects the cross color processing
during playback.
0000 OFF :
The cross color is output with no changes
made.
0001 ON :
The cross color can be reduced.
<Note>
This setup menu is not displayed in the 625i
system.
620
ESR MODE
This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.
0000 OFF :
The mode is forcibly set to OFF.
0001 AUTO :
The mode is automatically set to ON or OFF
depending on the VTR operation.
No./Item Description
622
SETUP 25
For setting 7.5% setup processing to be
performed on input and output signals in the
DVCPRO (25 Mbps) mode.
When the STOP button is pressed, operation is
transferred to the sub-screen, and the setup
level is set for each output. To return from the
sub-screen, press the STOP button again.
<Note>
This setup menu is not displayed in the 625i
system.
00
CMPST IN
Sub-screen
This selects the 7.5% setup processing for
the input composite signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
02
CMPNT IN This selects the 7.5% setup processing for
the input component signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
03
CMPNT OUT This selects the 7.5% setup processing for
the output composite, component and serial
(digital) signal.
0000 THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5% setup
removed.
0002 ADD :
The signal is output with the 7.5% setup
added.
01
CMPST OUT This selects the 7.5% setup processing for
the output composite signal.
0000 THRU :
The signal is output in its original form.
0001 ADD :
The signal is output with the 7.5% setup
added.
<Note>
Bear in mind the setting for sub-screen item No.
03 (CMPNT OUT) of setup menu item No. 622
(SETUP 25).