Panasonic CF-18 - Manual (Page 38)

38
Standby/Hibernation Functions
• When playing/recording audio files and displaying images (such as MPEG files).
• When using communications software or the network function.
• When using PC Cards.
(If these cards fail to work properly, restart the computer.)
• When an external mouse is connected to the serial port.
When entering the standby or hibernation mode
Standby mode: until the power indicator blinks green
Hibernation mode: until the power indicator goes off
Avoid the following:
• Using the keyboard, touch pad, touchscreen, tablet buttons, or power switch.
• Using external mouse or other peripheral devices.
• Connecting or disconnecting the AC adaptor.
• Closing or opening the display.
It may take one or two minutes to enter standby or hibernation mode.
In standby or hibernation mode
Do not insert or remove peripherals; abnormal operation may result.
In standby mode, power is consumed. If PC Cards are inserted, more power is
consumed. When all power has been consumed, all data saved at standby is lost since it
is retained in memory. We therefore recommend plugging in the AC adaptor when using
the standby function.
Using the Power Switch
Setting
1
Select [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Select [Stand by] or [Hibernate] for [When I press the power button
on my computer], and then select [OK].