Panasonic CF-18 - Manual (Page 47)

47
Security Measures
The hard disk lock function only works with the internal hard disk. This function does
not work with the second hard disk or the external hard disk.
Setting the Hard Disk Lock (enabling, disabling)
1
Run the Setup Utility. ( page 88 )
2
Using either or , select [Security].
3
Using either or , select [Hard Disk Lock] and press Enter .
4
Select [Enable] or [Disable].
To enable the Hard Disk Lock
Select [Enable] and press
Enter. At [Caution], press Enter.
To disable the Hard Disk Lock
Select [Disable] and press
Enter.
5
Press F10 and select [Yes], then press Enter .
CAUTION
To change your hard disk drive
• Contact Panasonic Technical Support.
• Before changing the hard disk, be sure to set the [Hard Disk Lock] to [Disable].