Panasonic CF-18 - Manual (Page 63)

63
RAM Module
Use a RAM module meeting the RAM module specifications below. If a module is used that
does not meet the specifications, there are cases in which data may become unusable or the
computer may not operate properly.
RAM module specifications:
200 pins, SO-DIMM, 2.5 V, DDR SDRAM, PC2100
(For information on the RAM modules that can be used, contact Panasonic Technical
Support.)
CAUTION
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such modules.
When inserting or removing a RAM module, do not touch the terminals or internal
components, insert objects other than the module, or allow foreign particles to enter.
Doing so has been known to cause damage, fire or electric shock.
CAUTION
If the RAM module is difficult to insert or difficult to press down, do not force it. Check
once more to ensure that the module is positioned correctly.
Use the proper size screw driver to insure that the screw does not get stripped.
The two screws shown at left are for fixing the speaker in place. Do not remove these
screws.
1
Power off your computer.
( ⇒ Operating Instructions "Starting Up/Shutting Down")
Do not use the standby or hibernation function.
Disconnect the AC adaptor and remove the battery pack. (
page 57 )
Inserting/Removing the RAM Module