Security measures – Panasonic CF-18 User Manual

Page 45

Advertising
background image

45

Security Measures

NOTE

Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on

Shift or Ctrl.

When you do not want the User Password enabled or changed without permission:

A

Run the Setup Utility and enter the Supervisor Password.

B

Go to [Security] menu. Using and , select [User Password Protection] and
press

Enter.

C

Using either or , select [Protected] and press

Enter.

When [Password on boot] is set to [Enable], it is impossible to start the computer without the
password.

NOTE

You cannot use [Password on boot] without setting the Supervisor Password. Set the
Supervisor Password if you have not done so. (

page 42

)

When starting up the Setup Utility, the password input screen will be displayed if a
Supervisor Password or Use Password has been set, even if [Password on boot] is set
to [Disable].

Setting the Password on boot (enabling, disabling)

1

Run the Setup Utility. (

page 88

)

2

Using either

or

, select [Security].

3

Using either or , select [Password on boot] and press

Enter

.

When you do not want your computer to be used without
permission

Advertising