Perle Systems 5500208-41 - Manual (Page 71)

71
TFTP File Transfer Commands
TFTP File Transfer Commands
Netload
Description Transfers a file from a remote host to the IOLAN using the TFTP protocol.
User Level Admin
Syntax
Options text-config
Specify this option if you are uploading a text-based configuration file to the IOLAN
from a TFTP server.
factory-default-config
firmware
Specifies that you are going to download a new firmware file to the IOLAN.
configuration
Specifies that you are going to download a new configuration file to the IOLAN.
customlang
Specifies that you are going to download a custom language file to the IOLAN.
term1|term2|term3
You can create and download up to three custom terminal definitions to the IOLAN.
customapp-file
<hostname/ip_address>
The IP address or host name where the file you are downloading to the IOLAN resides.
If you are using a host name, it must be resolved in either the IOLAN’s Host Table or a
DNS server.
<filename>
The complete path and file name (cannot use a drive letter) of the file you are
downloading to the IOLAN.
netload text-config|factory-default-configfirmware|configuration|
customlang|term1|term2|term3|customapp-file
<hostname/ip_address> <filename>
Specifies the configuration file that you are going to load from a TFTP server to the
IOLAN that will act as the factory default configuration. See the User Guide for
directions on how to revert back to the original factory default configuration, if
required.
You can download multiple SDK program executables and ancillary files using this
command by running the command multiple times to download multiple files. Use the
shell CLI command as described in the SDK Programmer’s Guide to manage the files
that you download.