Planet Technology DVR-860 - Manual (Page 31)

MENU FUNCTION
-25-
IPS per channel = RECORD IPS ч 2 ч number of channels in a group which is under recording.
NOTE: The total IPS share is always “FIX”.
6.2 Timer
Press “MENU” button on the front panel to enter the main menu list. Move the cursor to “TIMER”, and press ”ENTER”.
The screen will show the following options.
RECORD
DATE START END
MENU OFF 00 : 00 - 00 : 00
RECORD DAILY 08 : 00 - 18 : 00
TIMER SUN 06 : 00 - 23 : 00
DATE MON-FRI 18 : 00 - 23 : 00
ADVANCE OFF 00 : 00 - 00 : 00
OFF 00 : 00 - 00 : 00
OFF 00 : 00 - 00 : 00
The submenu items are described below:
1) DATE
Select from the following 11 options to schedule up to 7 sets of recording days: SUN / MON / TUE / WED / THU / FRI /
SAT / MON–FRI / SAT-SUN / DAILY / OFF.
If you plan to set the timer recording across the midnight, there are two ways to set the timer recording schedule.
Please check the examples below.
Example 1:
If you only want to set the recording schedule from Sunday 23:30 to Monday 23:30, set the schedule as Sunday from
23:30 to 23:30.
Example 2:
If you want to set the recording schedule from Sunday 08:00 to Monday 15:00, set the schedule as Sunday from 08:00
to 24:00, and Monday 24:00 to 15:00.
Note: Before setting the timer recording schedule, please turn on “TIMER RECORD ENABLE” in “RECORD”
menu list. For details, please refer to the section “6.1 Record”.
6.3 Date
In this menu list, you can set up the system date and time for this device.
Note: When the recording function is activated, please DO NOT change the date or time on your DVR. For
details, please refer to the section “4.1 Recording”.
Press “MENU” button on the front panel to enter the main menu list. Move the cursor to “DATE”, and press ”ENTER”.
The screen will show the following options.
MENU DATE
RECORD DATE 2006 – Dec - 01 12 : 15 : 30
TIMER FORMAT Y - M - D
DATE DAYLIGHT SAVING ON
ADVANCE
The submenu items are described below:
1) DATE:
Set the current date and time. The default order is “YEAR – MONTH – DATE HOUR : MIN : SEC”.
2) FORMAT
Select one date format from the following 3 options: Y-M-D, M-D-Y, D-M-Y.
3) DAYLIGHT SAVING
Specify whether to use daylight-saving time (ON / OFF). If it’s set to ON, press “ENTER” to go to its submenu for
further settings. You will see a similar screen as following.
DAYLIGHT SAVING
START 4TH - SUN - MAR 24 : 00 : 00
END 4TH - SUN - OCT 24 : 00 : 00
ADJUST 01 : 00