Planet Technology DVR-860 - Manual (Page 62)

LICENSED SOFTWARE AP
-56-
(5) Timer Record
In “DVR” Æ “Timer Record”, you can schedule up to 7 sets of time for recording.
Note: The same settings can also be made in the DVR. Refer to the section “6.2 Timer” at page 25 for details.
‧ DATE
Choose a day from “DATE” dropdown menu. The options are OFF, SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI,
SAT-SUN and DAILY.
‧ START
Enter the start time of timer recording.
‧ END
Enter the end time of timer recording.
Press “APPLY” to confirm the setup, or “EXIT” to quit without saving.
(6) Date
In “DVR” Æ “Date”, you can set the date for your DVR. Please DO NOT change the date or time when the recording
function is activated. For details, please refer to the section “4.1 Recording” at page 18.
Note: The same settings can also be made in the DVR. Refer to the section “6.3 Date” at page 25 for details.
‧ DATE
Choose the current date from “DATE” drop-down menu and enter the current time.
When you click the drop-down menu, a calendar shown for you to set the current date.
‧ FORMAT
Choose the format for date display from the three options: Y-M-D, D-M-Y and M-D-Y.
‧ DAYLIGHT SAVING
Specify whether to use daylight saving time (ON / OFF) and time period (START / END), and adjust the daylight saving
time in hour (ADJUST).
Press “APPLY” to confirm the setup, or “EXIT” to quit without saving.