7 network – Planet Technology DVR-860 User Manual

Page 38

Advertising
background image

MENU FUNCTION

-32-

6.4.7 Network

In this menu list, you can set up the network. For detailed network setup, please refer to the section “3.7 LAN or Internet
Setup”.

Move the cursor to “NETWORK”, and press ”ENTER”. You will see a similar screen as the following:

ADVANCE

NETWORK

CAMERA

NETWORK

TYPE

STATIC

DETECTION

DNS

168. 95. 1. 1

DISPLAY

PORT

0080

ALERT

REMOTE

SYSTEM

NETWORK

BACKUP

HDD INFO

EVENT LOG

The submenu items are described below:

1) NETWORK TYPE

There are 3 network types: STATIC, PPPOE and DHCP.

STATIC

Select NETWORK TYPE, press “+” or “-” button to set the network type as STATIC, and then press “ENTER” to
go to the submenu of the network. In the submenu of network type, use “+” or “-” button to set all the information
needed in the DVR. See the example below, and refer to the section “3.7.1 STATIC IP” for details.

STATIC

IP

160 . 121 . 346 . 236

GATEWAY

160 . 121 . 346 . 236

NETMASK

255 . 255 . 255 . 254

PPPOE

This PPPoE function needs to have one “username” and one “password” subscribed from one ISP supplier.

For detailed PPPoE settings, please follow the AP (Licensed Software AP) setup, and then refer to the section
“3.7.4 Dynamic IP - DHCP”, and “ (1) DDNS” in section 7.5.1 Network”.

DHCP

The DHCP function needs to be supported by a router or a cable modem network with DHCP services.

For detailed DHCP settings, please follow the AP (Licensed Software AP) setup, and then refer to the section “3.7.3
Dynamic IP - PPPOE”, and “
(1) DDNS” in section 7.5.1 Network”.

Note: DHCP and PPPoE network types need to apply DDNS services to get “Hostname” to correspond to the

dynamic IP address. For detailed DDNS settings, please refer to “ (1) DDNS” in section “7.5.1
Network”
.

2) DNS

Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).

3) PORT

The valid number ranges from 1 to 9999. The default value is 80.

Note: Typically, the TCP port used by HTTP is 80. However in some cases, it is better to change this port

number for added flexibility or security.

Advertising