Planet Technology DVR-860 - Manual (Page 40)

MENU FUNCTION
-34-
Symbol “X” means that this channel is not selected to backup.
Symbol “●” means that this channel is selected to backup.
‧ HDD NUM
Press “ENTER” to select the HDD containing the data you need.
‧ BACKUP TO USB
Press “ENTER” to start copying the chosen data to the USB flash drive.
6.4.9 Disk Backup (DVR-860 only)
Before making Disk Backup, please check if:
a.) The DVD-RW / CD-RW driver was supported by DVR-860 and the DVD-RW / CD-RW had been connect to your
DVR properly. If not, the “DISK BACKUP” will not appear in this screen. About the compatible DVD-RW /
CD-RW list and the installation method, please refer to the “APPENDIX 7 INSTALL DVD-RW / CD-RW”.
b.) If you want to use a DVD-RW, please choose the DVD-R hardware. DVD+R hardware is not supported.
Move the cursor to “DISK BACKUP”, and press ”ENTER”. You will see a similar screen as the following:
BACKUP DISK BACKUP
USB BACKUP START TIME 2006 – 12 – 01 21 : 35 : 00
DISK BACKUP END TIME 2006 – 12 – 01 21 : 45 : 00
AVAILABLE SIZE 4083 MB
CHANNEL z 01 z 02 X 03 X 04
z 05 z 07 X 03 X 08
HDD NUM HDD-MASTER-1
BACKUP TO DISK START
The submenu items are described below:
‧ START TIME
Select the start time of the backup.
‧ END TIME
Select the end time of the backup.
‧ AVAILABLE SIZE
Display the available capacity in the inserted DVD-RW / CD-RW.
‧ CHANNEL
Select channels by pressing “ENTER” button to change the symbol in front of the channel number.
Symbol “X” means that this channel is not selected to backup.
Symbol “●” means that this channel is selected to backup.
‧ HDD NUM
Press “ENTER” to select the HDD containing the data you need.
‧ BACKUP TO DISK
Press “ENTER” to start copying the chosen data to the DVD-RW / CD-RW.
NOTE: A.) The maximum number of backup files in the CD is 41. B.) The backup file can be played directly in your PC
via the supplied licensed AP, or via other media players (Ex: Windows Media Player or RealPlayer) after the file
is converted to “AVI” format.
6.4.10 HDD Info
In this menu list, you can view the remaining capacity of all the connected HDDs in this device.
Move the cursor to “HDD INFO”, and press ”ENTER”. You will see a similar screen as the following: