Perle Systems RPS1630 - Manual (Page 26)

5-2
RPS Series: Remote Power Switches - User's Guide
5.2. Communicating with the RPS
In order to configure the unit or invoke command functions, you must first
connect to the RPS and access the command mode. As discussed in Section 3,
the RPS offers two separate command interfaces: the Web Browser Interface,
and the Text Interface.
The RPS also offers three different methods for accessing command mode; via
network, via external modem, or via local console. The Web Browser Interface
is only available when the RPS is contacted via network, and the Text Interface
is available via network, modem or local PC. The sections that follow describe
the procedure for accessing the Web Browser Interface or the Text Interface.
Note: Configuration functions are only available when you have
logged into command mode using the System Password.
Figure 5.1: Plug Status Screen - Web Browser Interface (Model RPS830 Shown)