Perle Systems RPS1630 - Manual (Page 45)

5-21
Confi guration
The Telnet Parameters Menus allow the following parameters to be defined.
Please note that all parameters listed here are available via both the Web
Browser Interface and Text Interface.
• Service: Enables/Disables Telnet communication with the RPS unit.
When this item is set to the "Off" condition, user’s will not be able to
contact the unit via Telnet. (Default = On.)
• Port Number: Selects the TCP/IP port number that will be used for
Telnet connections. (Default = 23.)
• Multiple Telnet: When enabled, allows up to four simultaneous Telnet
connections to the RPS unit. When disabled, only one Telnet user may
connect to the RPS at a time (Default = Off.)