Panasonic TX-86PW100A - Manual (Page 12)

12
Remote Control Television Operation
BUTTON
WHAT IT DOES
CH SEARCH (TX-86PW100A & TX-76PW100A only)
This option is used to show freeze frames of the programmes being broadcast on all
the stored channels. The images are displayed clockwise around the edge of the
screen starting from the top left corner. The current programme is displayed in the
centre of the screen. When the display gets back to the top left corner it will
overwrite the first picture with the next one in series.
The display will continue to change until either the STILL button is pressed to pause
or CH SEARCH is pressed to exit the feature.
The Red button is used to select each programme in turn. The green button is used
to swap the main display between the current programme and the one selected by
the red button. The Blue button returns to normal viewing.
RED GREEN YELLOW BLUE
SELECT OK EXIT
DIRECT PROGRAMME NUMBER SELECTION
Single Digit Programme Numbers (0 to 9) can be accessed directly by pressing the
corresponding number on the Remote Control Transmitter.
TWO DIGIT PROGRAMME NUMBER SELECTION
To directly access Programme Numbers 10 to 99, press the “- / - -” Button followed
by the two digits required. For example, to select Programme Number 12:
The On-Screen display will be as shown:
_ _ 1_ 12
Please refer to drawing on Page 7 for location of Remote Control Buttons.
SELECT OK EXIT
1 2 4 3
5
6
4