Panasonic TX-86PW100A - Manual (Page 8)

8
Television Control Panel Buttons
BUTTON WHAT IT DOES
STR
This button is used to store tuning information and other function settings. It
is also used to start the menu demonstration.
F
The F button is used to select the on screen display functions. Press the
button to select the following functions sequentially.
Notes:
NTSC-TINT:
Only displayed when receiving NTSC signals.
TUNING MODE: Not displayed when in AV mode.
BALANCE: Not displayed when SURROUND is on.
- / \/
This button is used to select the next lower programme number.
It is also used with the F button to adjust function settings.
+ / /\
This button is used to select the next higher programme number.
It is also used with the F button to adjust function settings.
TV / AV
This button is used to switch between the TV mode, the four AV modes and
the RGB mode.
Please refer to drawing on Page 7 for location of Remote Control Buttons.
VOLUME GEOMAGNETIC
CONTRAST TUNING MODE
BRIGHTNESS BALANCE
SHARPNESS BASS
COLOUR TREBLE
NTSC-TINT
STR
F
- / \/
- / /\
TV/AV