Panasonic TX-86PW100A - Manual (Page 32)

32
Geomagnetic Correction
Magnetic interference may come from such things as unshielded motors, moving the TV while it is switched ON,
turning off a vacuum cleaner too close to the TV, lightning strikes nearby or many other things.
Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of the
screen (colour purity).
The Geomagnetic Correction feature can be used to eliminate some interference problems.
Quite often simply switching your Television OFF with the Power On/Off Switch (not with the remote control) for
30 minutes and then switching it back ON will cure the problem.
Geomagnetic corrections can be made from the remote control or from the TV set.
Using the Front Panel
1. Push the F button repeatedly to access the
Geomagnetic Correction Menu.
2. Push - / \/ or + / /\ to adjust the picture tilt
or coloured patches as necessary.
The adjustment range is from -8 to +8.
3. Push the F button to return to normal
viewing.
Using the Remote Control
1. Push the SET UP button.
2. Select the Geomagnetic Correction Menu by
Pushing the
/\ or \/ button.
3. Push - or + to access the Geomagnetic
Correction.
4. Push - or + to adjust the picture tilt or
coloured patches as necessary.
The adjustment range is from -8 to +8.
5. Push the SET UP button to return the TV to
the Set Up Menu.
Push the button on the remote control to return the television to normal operation.
Helpful Hint
1. If geomagnetic changes cause colour patches on the screen switch your Television OFF with the Power
On/Off Switch (not with the remote control) for 30 minutes and then switch it back ON.
2. Adjustment for geomagnetic should be performed every time the location of the TV is changed.
3. In some cases colour patches will not be completely eliminated even after adjustment, particularly in
ferroconcrete buildings and other structures susceptible to geomagnetic effects. In these cases the TV
location will have to be changed.
GEOMAGNETIC CORRECTION
000
GEOMAGNETIC CORRECTION
- , + : ADJUST TILT
F : TO EXIT
STR F -/\/ +//\ TV/AV
000
F : TO EXIT
GEOMAGNETIC CORRECTION
- + : ADJUST TILT
STR F -/\/ +//\ TV/AV