Help 101 – Panasonic KX-FG6550 User Manual

Page 103

Advertising
background image

10. Help

101

For assistance, please visit http://www.panasonic.com/consumersupport

The handset does not
ring.

L

The ringer volume is set to OFF. Adjust it (page 28).

L

If more than one other user is using the handsets and base unit,
the handset/base unit may not ring. Those users will hear incoming
call tones (feature #73 on page 83, feature 13 on page 88 or
feature 0*2 on page 90).

The display shows “

No

link to base. Move
closer to base and
try again.” and an
alarm tone sounds.

L

The handset is too far from the base unit.
Move closer and try again.

L

Plug in the base unit’s power cord.

L

Raise the base unit antennas.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

L

Move the handset and the base unit away from other electrical
appliances.

L

Move closer to the base unit.

L

Raise the base unit antennas.

L

Turn ON the clarity booster feature (page 35).

The handset stops
working while being used.

L

Place the handset on the charger, and disconnect the power cord
to reset the unit. Connect the power cord, and try again.

I cannot store an item in
the phone book.

L

You cannot store an item in the phone book while the handset is in
the talk, speakerphone, intercom, room monitor or remote
operation mode.

L

Do not pause for over 1 minute while storing.

While storing an item in
the phone book, the
handset starts to ring.

L

To answer a call, press {TALK}, {SP-PHONE}, {LINE1} (soft key)
or {LINE2} (soft key). Storing will be canceled. Store the name and
number again.

I cannot redial by
pressing
{

REDIAL/PAUSE}.

L

If the last number dialed was more than 48 digits long, the number
will not be redialed correctly.

L

The last number dialed may have been a remote function.

Recharge battery” is

displayed, 0688754
flashes or the handset
beeps intermittently.

L

Fully charge the battery (page 23).

Charge for 6 HRS” and

68885

are displayed and

the handset does not
work.

L

The battery has been discharged. Fully charge the battery (page
23)
.

I charged the battery fully,
but “

Recharge battery”

is still displayed and/or
0688754

continues to

flash, or “

Charge for 6

HRS” and 68885 are
displayed.

L

Clean the charge contacts and charge again (page 23).

L

The battery may need to be replaced (page 18). If you install a new
battery, fully charge it (page 23).

The [CHARGE] indicator
does not go out after the
battery has been charged.

L

This is normal.

Problem

Cause & Solution

FG6550-PFQX2225ZA-en.book Page 101 Monday, August 8, 2005 8:16 PM

Advertising