Adjusting cameras – PictureTel 4500 User Manual
Page 54
48
Adjusting Cameras
During a videoconference, you may need to adjust your cameras or the cameras at
the far-end site to show a different speaker or to zoom in or out on the people in
the meeting. (Remember that if you have LimeLight, you donÕt need to manually
adjust your cameras; LimeLight will automatically do it for you.)
To adjust your cameras with the wireless keypad:
Press
POINT
in the
NEAR END
section of the keypad to pan or tilt the camera or
press
ZOOM
in the
NEAR END
section of the keypad to zoom in or out.
(To adjust cameras at the far-end site, press
POINT
and
ZOOM
in the
FAR END
section of the keypad. You can only adjust cameras for a far-end site if the site
is conÞgured to allow it.)
Keep doing this until the image appears exactly the way you want it.
To adjust your cameras with the QuickPad:
1. Press
NEAR END
in the
VIEW
section of the QuickPad.
The image you are sending appears in the main window of the monitor.
(To adjust cameras at the far-end site, press
FAR END
in the
ADJUST
section of
the QuickPad. You can only adjust cameras for a far-end site if the site is
conÞgured to allow it.)
2. Press
POINT
to pan or tilt the camera or press
ZOOM
to zoom in or out.
Keep doing this until the image appears exactly the way you want it.
3. Press
FAR END
in the
VIEW
section of the QuickPad to return to normal viewing.
To adjust a document camera, use the controls on the camera itself to zoom in,
zoom out, or focus. Or, you can pivot or move the document camera as needed to
show another object.
F Y I
F.Y.I.
DonÕt use the
POINT
and
ZOOM
buttons at the same time.