PictureTel 4500 - Manual (Page 89)

83
No System Power
These are the steps to take if your system doesnÕt seem to have power.
If you have these
symptoms...
Do this...
The green LED on the
power supply is not lit.
The fans are not rotating.
No board LEDs are lit.
1. Make sure that the power switch at the back of
your system is set to 1 (on).
If you have a WorldCart
ª
, make sure that the
power switches for both the Concorde¥4500
and the WorldCart are set to
1 (on).
2. Run your hand in front of the monitor.
If there is static, the monitor is receiving
power.
3. Make sure that the system power cord is
plugged securely into both the electronics
module and the wall outlet.
4. Make sure that the line conditioner or noise
suppressor outlet is turned on, if your system
plugs into one instead of a wall outlet.
5. Make sure that power is available at the wall
outlet.