Cooling fluid level – Piaggio 400ie User Manual

Page 53

Advertising
background image

3. Impregnate the sponge with a mixture of 50% petrol and 50% specified oil.

4. Gently squeeze the filter element, let it drip and then refit it.

CAUTION

IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NECESSARY TO CARRY OUT
MAINTENANCE CONTROLS OF THE AIR FILTER TO AVOID DAMAGING THE
ENGINE.

Recommended products

AGIP FILTER OIL

Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness

03_12

Cooling fluid level (03_12, 03_13, 03_14, 03_15)

The engine cooling system operates by forcing circulation of fluid. The cooling circuit
contains about 2 litres of coolant consisting of a mixture of 50% de-ionised water and
glycol ethylene-based antifreeze solution with corrosion inhibitors. Recommended
coolant: supplied with the vehicle, already mixed and ready for use. For proper func-
tioning of the engine, the coolant temperature must be between the 4th and 7th lit
segment, as indicated by the instrument «D» on the digital instrument panel. When
the 9th segment lights up, the icon and all the segments start flashing; stop the engine,
let it cool down and check the fluid level; if the level is OK, contact an Authorised
Service Centre.

Check coolant when the engine is cold as indicated in the scheduled maintenance
table.

a) Rest the vehicle in vertical position on the stand and remove the screw of the ex-
pansion tank cap shown in the photo

b) Remove the expansion tank cover "A", turning in anticlockwise direction.

53

3 Maintenance

Advertising