Helmet compartment lighting bulb, Rear-view mirrors, Front and rear disc brake – Piaggio 400ie User Manual

Page 69

Advertising
background image

03_42

Helmet compartment lighting bulb (03_42)

Open the rear boot and insert a small plain slot screwdriver in the lateral notch to
detach the snap-on glass "D", then replace the bulb.

03_43

Rear-view mirrors (03_43)

The mirrors can be set to the desired position by adjusting the mirror frame.

Front and rear disc brake

The brake disc and pad wear is automatically compensated, therefore it has no effect
on the functioning of the front and rear brakes. For this reason it is not necessary to
adjust the brakes. An excessively elastic brake lever stroke may indicate the presence
of air in the braking circuit or a failure in the braking system. In this case, mainly due
to the importance of brakes to guarantee safe riding conditions, the vehicle should be
taken to an Authorised Service Centre or Dealer.

69

3 Maintenance

Advertising