Panasonic AJ-PD950 - Manual (Page 54)

Setup menus
USER menu
<TAPE PROTECT>
Item Setting
No. Superimposed No. Superimposed
display display
400 STILL 0000 0.5s
TIMER 0001 5s
0002 10s
0003 20s
0004 30s
0005 40s
0006 50s
0007 1min
0008 2min
401 SRC 0000 STEP
PROTECT 0001 HALF
4 0 2 D R U M 0000 OFF
STDBY 0001 ON
Description
This selects the time to be taken until the unit goes into the tape
protection mode when it is left standing in the stop or search still
(JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
This selects the operation during the tape protection mode
when the unit is left standing in the still status during the
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the HALF LOADING mode when the total time for which the
unit is left standing in the still status reaches 30 minutes.
This selects whether the head drum is to be rotated when
operation is transferred to the standby OFF mode.
0: Head drum remains stationary.
1: Head drum is rotated.
The underline on the setting item denotes the initial setting.
<Note>
The cumulative standby time at the same tape position increases when transmitting
programs or otherwise using identical materials repeatedly.
USER menu
<TIME CODE>
Item Setting
No. Superimposed No. Superimposed
display display
Description
5 0 0 VITC
BLANK
5 0 1 VITC
POS-1
0000 BLANK This selects whether to output the VITC data to the positions
0001
THRU selected by VITC POS-1 in 501 and VITC POS-2 in 502.
0: Data is not output.
1: Data is output.
525 mode This sets the position where the VITC signal is to be inserted.
0000
10L (The same line as for VITC POS-2 in 502 cannot be selected.)
0006 16L
0010
625 mode
0000
20L
7L
0004 11L
0014 21L
The underline on the setting item denotes the initial setting.
- 5 4 -