Aj-pd950 user menu, User menu, Audio> (continued) – Panasonic AJ-PD950 User Manual

Page 60

Advertising
background image

S e t u p m e n u s

USER menu

<AUDIO> (continued)

Item

Setting

No.

Superimposed

No.

Superimposed

display

display

Description

727

PB FADE

728

EMBEDDED

0000

OFF

This selects whether to superimpose the audio data onto the

AUD

0001

ON

serial output.
0: Data is not superimposed.

1: Data is superimposed.

729

MONITOR
MIX L

7 3 0

MONITOR

MIX R

731

CUE OUT

0000

OFF

SEL

0001

ON

0000

AUTO

0001

CUT

0002

FADE

0000

OFF

0001

CH1+2

0002

CH3+4

0000

OFF

0001

CH1+2

0002

CH3+4

This selects the processing method for the audio edit points
(IN point, OUT point) during playback.
0: According to the status during recording.

1: Forced CUT

2: Forced FADE

This selects the mixed signal for the headphone monitor.
0: No mixing.

1: CH1 and CH2 are mixed and output to the left channel.

2: CH3 and CH4 are mixed and output to the left channel.

This selects the mixed signal for the headphone monitor.
0: No mixing.

1: CH1 and CH2 are mixed and output to the right channel.

2: CH3 and CH4 are mixed and output to the right channel.

This selects whether or not the cue audio signal is to be output
to the main line output in the search mode.

0: CUE AUDIO is not output.

1: CUE AUDIO is output.

(This applies only when setup menu No. 721 (MONI CH
SEL) is not set to “MANU”.)

The underline on the setting item denotes the initial setting.

AJ-PD950 USER menu

The following setup menu is displayed when the AJ-PD950 is used.

Item

Setting

No.

Description

Superimposed

No.

Superimposed

display

display

012

SYS

0000

422

This sets the unit’s recording/playback format.

FORMAT

0001

411

0: The 422 (50M) format is selected.

0002

420P

1: The 411 (25M) format is selected.

2: The 420P format is selected.
<Notes>

608

SDI OUT
SEL

0000
0001

002

Editing is not possible in the 411 mode.

In the 625 mode, 420P cannot be selected.

COMPNT

This selects the SERIAL OUT signal format.

COMPST

0: Component 4:2:2 signals are output.

420P

1: Composite signals are output. (Option)

2: Component 4:2:2P signals are output.

The underlining indicates the factory setting.

- 6 0 -

Advertising
This manual is related to the following products: