Panasonic AJ-PD950 - Manual (Page 46)

Setup (setting) menus
SYSTEM menu
<SYSTEM>
Item
No. Superimposed
display
0 0 ENCODER
SEL
01 SYS SC
02 SYS H
0 3 V I D E O
PHASE
04 SCH
COARSE
05 SCH FINE
06 AV PHASE
07 SYS H
0000 FULL
RANGE
0001 FINE
Setting
No. Superimposed
0000
0001
display
REMOTE
LOCAL
0000 -127
0127 0
0255 128
0000 -108
0108 0
0216 108
0000
0032
0064
0000
0001
0002
0003
-32
0
32
0
90
180
270
0000 -32
0032 0
0064 32
0000 -100
0100 0
0200 100
Description
This selects whether the video output signal is to be adjusted
on the VTR or with the external encoder remote control.
0: Video output signals are adjusted with the external encoder
remote control.
1: Video output signals are adjusted on the VTR.
System phase adjustment: Total variable range: ±180° or
more
-: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
System phase adjustment: 74 ns steps
-: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
Video phase adjustment: 148 ns steps
-: Advanced
+: Delayed
SCH phase adjustment: 90° units
-: Advanced
+: Delayed
(The S and C phases change but the H phase does not
change.)
SCH phase adjustment: Total variable range: ±45° or more
-: Advanced
+: Delayed
(The S and C phases change but the H phase does not
change.)
This adjusts the audio output phase with respect to the video
output: 20.8 s steps
-: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the video
output.
This selects the adjustable range for SYSTEM H during when
the ENCODER REMOTE is connected.
0: ±8 sec (±30 seteps)
1: -1.9 to +2.7 sec (-7 to +10 steps)
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
The underline on the setting item denotes the initial setting.
- 4 6 -