Panasonic AJ-PD950 - Manual (Page 56)

Setup menus
USER menu
<VIDEO>
Item
Superimposed
No.
display
600 INT SG
6 0 1 OUT
VSYNC
6 0 2 V-MUTE
SEL
6 0 3 CC (F1)
BLANK
6 0 4 CC (F2)
BLANK
6 0 5 FREEZE
SEL
6 0 6 OUT C
KILL
6 0 7 VOUT
SETUP
6 0 8 SDI OUT
SEL
6 0 9 EDH
6 1 0 PB/PR
IN LV
611 INPUT
C KILL
6 1 2 IN FRM
DET
Setting
Superimposed
N o .
0000
0001
0002
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
display
OFF
BB
CB
Description
This selects whether to generate the internal signal.
0: Signal is not generated.
1: The black burst is generated.
2: 100% color bars are generated.
This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
N-VF
VF
N-MUTE
LOW RF
BLANK
THRU
BLANK
THRU
FIELD
FRAME
B/W
COLOR
THRU
ADD
COMPNT
COMPST
OFF
ON
M
B-CAM
B/W
AUTO
FORCED
AUTO
This selects whether the video output signal is set to MUTE
when LOW RF is detected during playback.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed caption signal in the
first field.
0: Forced blanking performed.
1: Blanking not performed.
This selects ON or OFF for the closed caption signal in the
second field.
0: Forced blanking performed.
1: Blanking not performed.
This selects the freeze mode for still pictures.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma color killer processing for the video output
signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects the composite output signal.
0: The signal is output without setup.
1: The signal is output with 7.5% setup.
<Note>
This setup menu is not displayed in the 625 mode.
This selects the SERIAL OUT signal format.
0: The component 4:2:2 signal is output.
1: The composite signal is output. (option)
This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
This selects the component input signal level.
0: M level.
1: cam level.
This selects color killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects the conditions under which frame detection is to
be performed when signals are input.
0: Frame detection is performed at all times.
1: Frame detection is prohibited only when non-standard
signals are input.
The underline on the setting item denotes the initial setting.
- 5 6 -