Panasonic AJ-PD950 - Manual (Page 65)

Servo reference
This unit automatically selects the input video signal selected by the INPUT switch, the
reference video signal supplied from the REF VIDEO input connector or the internal sync
signal as the servo reference signal.
When the signal is selected, the unit’s mode and servo reference stand in the relationship
shown in the flowchart presented below.
EXT
What is the SERVO REF on the setup
menu No. 304 setting?
AUTO
YES
Is the unit in the recording mode?
NO
Is the unit in the editing mode?
(Is VIDEO, CH1, CH2, CH3, CH4, CUE
YES
or TC selected?)
NO
BB/CB
NO
What is the setup menu
No. 600 (INT SG) setting?
OFF
Is the input video signal
available?
YES
NO
Is the REF VIDEO signal supplied?
YES
The REF VIDEO input The internal sync signal
signal serves as the serves as the reference
reference signal. signal.
The input video signal
serves as the reference
signal.
- 6 5 -