Panasonic AJ-PD950 - Manual (Page 80)

RS-232C interface
VTR
operation
Send command
SHTL
REVERSE
[STX] OSR:data [ETX]
Return (completion)
message
Supplementary notes
[STX] OSR [ETX] This is the reverse direction shuttle command.
data = n: speed data
0: STILL
1: Ч0.03
2: Ч0.1
3: Ч0.2
4: Ч0.5
5: Ч1
6: Ч1.85
7: Ч4.1
8: Ч9.5
9: Ч16
: This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
A: ×32 : This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
STANDBY
OFF
STANDBY
ON
[STX] OBF [ETX]
[STX] OBN [ETX]
[STX] OBF [ETX]
[STX] OBN [ETX]
This command is setting the VTR to standby OFF.
This command is setting the VTR to standby ON.
- 8 0 -