Pioneer PDP-508XDA - Manual (Page 50)

Useful adjustment settings 10
50
En
Changing the password
Use the following procedure to change the password.
1 Press HOME MENU.
2 Select “Setup“ ( / then ENTER).
3 Select “Password“ ( / then ENTER).
The password entry screen appears. Enter the current four-digit
password using buttons
0 to 9.
4 Select “Change Password“ ( / then ENTER).
5 Enter a four-digit password to be newly set, using buttons
0 to 9.
6 Enter the same password that you have entered in step 5.
• If a different password is entered, the operation goes back to
step 5 for reentry from the beginning.
• You can try up to three times to reconfirm the new password
before the Change Password screen is automatically exited.
7 Press HOME MENU to exit the menu.
Note
• Take a note of the newly set password and keep it handy.
Resetting the password function
1 Press HOME MENU.
2 Select “Setup“ ( / then ENTER).
3 Select “Password“ ( / then ENTER).
The password entry screen appears. Enter your four-digit
password using buttons
0 to 9.
4 Select “Reset“ ( / then ENTER).
5 Select “Yes“ ( / then ENTER).
6 Press HOME MENU to exit the menu.
Note
• The above procedure will reset the password to the factory
default (1 2 3 4).
Change Password
Please Input New Password.
Reconfirm New Password.
We suggest you write down your password so you don’t forget it.
If you forget the password
When the message “Please Input Your Password” is displayed,
press the
ENTER button on the remote control unit and hold it
down for three seconds or longer. The password reverts to “1234”.
Note that it is not possible to reset the password from the DTV
Setup screen.
PDP-508XDA / PDP-428XDA
Your password No.: