Pioneer PDP-508XDA - Manual (Page 59)

Using with other equipment 11
59
En
Starting the Slide Show Setup screen
When the thumbnail screen is displayed, press GREEN to start the
screen for setting up for Slide Show that sequentially changes
images.
1 Select “Display Mode” ( /).
2 Select “Normal” or “Full” ( /).
• With “Full” selected, images are displayed using the full
screen.
3 Select “Playback Order” ( /).
4 Select “Name Order” or “Random” ( /).
5 Select “Repeat Mode” ( /).
6 Select “Single Time” or “Loop” ( /).
• With “Loop” selected, Slide Show is repeated until RETURN
is pressed.
7 Select “Playback Mode” ( /).
8 Select “Auto” or “Manual” ( /).
• With “Auto” selected, images automatically change at the
specified intervals.
• With “Manual” selected, images change each time you press
P+/P–.
9 If you have selected “Auto” in step 8, press / to select
“Interval (sec.)”, and then press / to select the desired
display duration for individual images.
• You can select from among 3 seconds, 5 seconds, 10
seconds, 20 seconds, 30 seconds, 60 seconds, and 90
seconds.
10 To start the Slide Show screen, press RETURN to display
the thumbnail screen and then press RED.
• To quit the Home Gallery function, press HOME MENU.
Starting the Slide Show screen
After setting up for Slide Show, you can start Slide Show to
sequentially change images.
1 To start the Slide Show screen, press RED when a
thumbnail screen is displayed.
• With “Auto” selected for “Playback Mode”, images
automatically change at the specified intervals.
• With “Manual” selected for “Playback Mode”, press P+/P– to
change images.
• While images are automatically changing, you can stop and
hold automatic image change for approximately 90 seconds
by pressing
RED. To resume, press RED again.
2 When quitting the Slide Show screen, press RETURN to
restore the thumbnail screen or HOME MENU to quit the
Home Gallery function.
Note
• When paused during a slideshow is played, the screen is
automatically changed to the next image in five minutes.
• If no operation is continued for five minutes, the Home Gallery
function automatically finishes except when the slideshow is
played with “Loop” selected for the “Repeat Mode”.
Adjusting the picture quality
When a thumbnail screen is displayed, press YELLOW. The same
picture adjustment screen as the PC source is displayed. For the
subsequent procedure, see page 30.
Home Gallery
HOME MENU Exit
Display Mode
Slide Show Setup
Playback Order Name Order
Repeat Mode Single time
Playback Mode Auto
Interval (sec) 3
Normal