Using with other equipment 11 – Pioneer PDP-508XDA User Manual

Page 57

Advertising
background image

Using with other equipment

11

57

En

Enjoying through USB interface (Home
Gallery function)

On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still camera.
You can also connect your digital camera directly to the plasma
television using a USB connector cable.

Note

• A single USB device can only be connected at a time. No USB

hub can be connected.

• Such devices as a printer or keyboard cannot be connected

and used.

Readable memory cards

This system can read memory cards whose formats are FAT16,
FAT32, or VFAT.

Readable data files

This system can read only JPEG files that meet the following
conditions:

• Extensions are JPG or JPEG.

• JPEG 4:2:2 and 4:2:0 format

• The image resolution must be less than 3264 pixels in the

horizontal direction and 2448 pixels in the vertical direction.

• The image resolution must be higher than 160 pixels in the

horizontal direction and 120 pixels in the vertical direction.

Note

• This system may not be able to display images, depending on

the type of your memory card, or camera.

• This system may not be able to display images modified or

edited using a personal computer or other equipment.

• This system complies with the USB Mass Storage Class, SIC

(Still Image Capture) Class + PTP and Multiple LUN (Logical
Unit Number) Class.

Connecting a USB device

Hold the USB device’s connector with its top side facing the front
panel, and then insert it into the USB port on the side of the plasma
television.

• Insert the USB device’s connector as far as it goes.

• When using the USB connector of your device, connect it

directly to the USB port.

Removing a USB device

To remove a USB device’s connector, quit the Home Gallery screen
and then remove it.

Note

• Be sure to quit the Home Gallery screen before removing the

USB device. If you remove the USB device while the Home
Gallery screen is displayed, data inside the memory may be
damaged.

• Do not insert or remove the USB device immediately after the

system is switched on or off. This may cause data inside the
memory to be damaged.

• Do not turn the digital camera off while the Home Gallery

screen is displayed.

Digital still
camera

Multi-card reader

Image data display

USB connector cable

USB flash drive

Side of the plasma television

USB flash drive or
multi-card reader

Advertising
This manual is related to the following products: