Panasonic PT VX400NTU - Manual (Page 75)

Technical Information
ENGLISH -
75
Appendix
J
Cable specifications
[When connected to a computer]
Projector
1 NC NC 1
Computer (DTE
specifications)
2 2
3 3
4 NC NC 4
5 5
6 6
7 7
8 8
9 9
J
Control commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command Control contents Remarks
PON Power [ON]
POF Power [OFF]
IIS INPUT selection
(Parameter)
VID = Video
SVD = S –video
RG1 = Computer 1 (RGB)
RG2 = Computer 2 (RGB)
HD1 = HDMI
SCT = Computer 1 (Scart)
NWP = Network
OSH AV mute function
Turning off the projection and sound temporarily.
Sending the command switches ON/OFF.
Do not switch ON/OFF in a short period of time.
OFZ Freeze Sending the command switches ON/OFF.
AUU Volume up
AUD Volume down
DZU D. ZOOM up
DZD D. ZOOM down
QPW Power query
000 = Standby
001 = Power on
Q$S
Lamp condition
query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active