Panasonic PT VX400NTU - Manual (Page 81)

Technical Information
ENGLISH -
81
Appendix
Mode
Display
resolution * 1
(dots)
Scanning
frequency
Dot clock
frequency
(MHz)
Picture
quality * 2
PnP
Format
H (kHz)
V
(Hz)
PT-
VX400NTU
COMPUTER HDMI
D-SXGA 1280 x 1024
63.98 60.02 108
H
60.276 58.069 93.067
31.65 29.8 53.48
D-1035i 1920 x 1035i 33.75 60.00 74.25
D-1080/50i 1920 x 1080i 28.125 50.00 74.25
D-1080/60i 1920 x 1080i 33.75 60.00 74.25
D-1080p 1920 x 1080
67.5 60.00 148.5
56.25 50.00 148.5
D-WXGA+1 1440 x 900 55.935 59.887 106.500
D-WSXGA+1 1680 x 1050 65.290 59.954 146.250
D-WUXGA 2 1920 x 1200 74.038 59.950 154.000
“i” added to the resolution value indicates an interlaced signal. *1 :
Picture quality is indicated by the following symbols. *2 :
AA: Maximum picture quality can be obtained.
A: Signals are converted by the image processing circuit.
Note
The number of display dots is 1024 x 768 for the PT-VX400NTU. z
A signal with a different resolution will be projected after converting the resolution to match the projector
display.
When interlaced signals are connected, flicker may occur on the projected image. z