Pioneer XDJ-AERO - Manual (Page 11)

11 En
Connections
Connecting by wireless LAN
On this unit, wireless LAN connections can be used to connect to mobile
devices or computers supporting wireless LAN connections and hold DJ
performances using music files on the mobile devices or computers.
To make DJ performances using a wireless LAN, the LINK EXPORT
function must be used after making the wireless LAN connection then
establishing the link.
For instructions on establishing the link, see the User’s Manual for
rekordbox (iOS/Android) or the Operating Instructions for rekordbox
(Mac/Windows).
About the wireless LAN function’s
operation mode
On this unit, the wireless LAN function’s operation mode can be
switched according to the usage purpose. There are two operation
modes for the wireless LAN function, as described below.
Access point (AP) mode
In this case, this unit is the main unit on the LAN network. Data is
exchanged directly with the mobile devices or computers through wire-
less connections.
WLAN client mode
In this case, this unit is a sub unit on the LAN network. Data is
exchanged with the mobile devices or computers via a wireless LAN
access point device.
Setting the wireless LAN function’s
operation mode
Set the wireless LAN function’s operation mode before connecting this
unit by wireless LAN.
The buttons and controls below are used for making the wireless LAN
function’s operation mode settings and wireless LAN connection
settings.
! By default, the access point (AP) mode is set.
STANDBY/ON
AUTO CUE
UTILITY
TIME
rekordbox
MIDI
USB
1
WPS
2 3 4
INFO
TOP
BACK
QUANTIZE
1 2 3 4
8 7 6
5
1 STANDBY/ON indicator
2 STANDBY/ON button
3 WPS indicator
4 WPS button
5 Link indicators
6 Rotary selector
7 BACK(TOP) button
8 INFO(UTILITY) button
1 Press [STANDBY/ON] button.
Turn on the power of this unit.
The [STANDBY/ON] indicator lights green.
2 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
3 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
See page 28 for the list of [WLAN SETTING] items.
4 Turn the rotary selector, select [MODE], then press
the rotary selector.
5 Turn the rotary selector, select the mode you want to
set, then press the rotary selector.
— [ACCESS POINT(AP)]: Sets this unit to the access point (AP)
mode. This unit is set as the master unit on the network.
— [WLAN CLIENT]: Sets this unit to the WLAN client mode. This
unit is set as a sub unit on the network.
— [OFF]: Turns the wireless LAN function off.
6 When [APPLY CHANGES?] appears on the main unit
display, turn the rotary selector to select [YES], then
press the rotary selector.
Now make the connection settings for the access point (AP) or WLAN
client mode (page 12).