Pioneer XDJ-AERO - Manual (Page 17)

17 En
Part
names
and
functions
! When a new cue point is set, the previously set cue point is canceled.
 Adjusting the cue point position
1 Turn the jog dial while pausing at a cue point.
The [f (PLAY/PAUSE)] and [CUE ] indicators flash.
The cue point can be fine-adjusted in units of 10 msec.
2 Press the [CUE ] button.
The position at which the button was pressed is set as the new cue point.
! When a new cue point is set, the previously set cue point is canceled.
 Returning to Cue Point (Back Cue)
During playback, press the [CUE ] button.
The set immediately returns to the currently set cue point and pauses.
! When the [f (PLAY/PAUSE)] button is pressed, playback starts
from the cue point.
 Checking Cue Point (Cue Point Sampler)
Keep pressing the [CUE ] button after returning to the
cue point.
Playback starts from the set cue point. Playback continues while the
button is held in.
Setting the loop automatically based on
the track’s tempo (Auto Beat Loop)
1 During playback, turn the [AUTO BEAT LOOP] control
to set the length for loop playback in number of beats.
The main unit display switches to the beat display.
2 Press the [AUTO BEAT LOOP] control to start loop
playback.
The loop out point is set automatically according to the track’s tempo
(BPM) and loop playback starts.
! Loop playback cannot be performed properly if the BPM value is not
displayed.
! When auto beat loop is set, the cue point moves to the loop in point.
! When the [AUTO BEAT LOOP] control is pressed during loop play-
back, loop playback is canceled.
Operating the jog dial
! The top of the jog dial has an embedded switch. Do not place objects
on the jog dial or subject it to strong forces.
! Water or other liquids getting into the set will lead to malfunction.
 Scratch
1 Press the [JOG DRUM] button.
The jog dial indicator lights blue.
Switch the jog dial to the VINYL mode.
2 During playback, press the top of the jog dial.
Playback stops.
3 Spin the jog dial in the desired direction and at the
desired speed.
The sound is played according to the direction and speed at which the
jog dial is spun by spinning the top of the jog dial while pressing it.
4 Release your hand from the top of the jog dial.
Normal playback resumes.
 Pitch bend
During playback, spin the outer section of the jog dial
without touching the top.
The playing speed increases when spun clockwise, decreases when
spun counterclockwise. When spinning is stopped, playback returns to
the normal speed.
 Jog drum
For details on the jog drum function, see Using the jog drum function on
page 25.