Pioneer XDJ-AERO - Manual (Page 8)

8 En
 For Windows ® 7, Windows Vista ® and Windows ®
XP
Read Cautions on installing the software carefully before installing
rekordbox (Mac/Windows).
! Authorization of the computer’s administrator is required to install
and uninstall rekordbox (Mac/Windows).
Log on as the user registered as the computer’s administrator before
installing rekordbox (Mac/Windows).
1 Insert the included CD-ROM into the computer’s CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the CD drive from [Computer (or My Computer)] in the [Start]
menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM’s menu is displayed, select
[rekordbox: Install Music Management Software], then
click [Start].
! To close the CD-ROM menu, click [Exit].
3 Install rekordbox (Mac/Windows) following the
instructions on the screen.
! Click [Cancel] to cancel installation after it has started.
Launching rekordbox (Mac/Windows)
Log on as the user which was set as the computer’s administrator before
using rekordbox (Mac/Windows).
! When rekordbox (Mac/Windows) is started up for the first time, the
license key must be input. The license key is affixed to the CD-ROM
package.
! When rekordbox (Mac/Windows) is started up, the operating instruc-
tions can be viewed from the rekordbox (Mac/Windows) [Help]
menu.
 For Mac OS X
Open the [Application] folder with Finder, then double-
click [rekordbox (Mac/Windows) 1.x.x.app].
! The 1.x.x indicates the rekordbox (Mac/Windows) version.
 For Windows ® 7, Windows Vista ® and Windows ®
XP
Click on the Windows [Start] menu button, then [All
Programs] > [Pioneer] > [rekordbox (Mac/Windows)
1.x.x] > [rekordbox (Mac/Windows) 1.x.x].
! The 1.x.x indicates the rekordbox (Mac/Windows) version.
Installing the driver software
This driver software is designed exclusively for inputting and outputting
sound from the computer. To use this unit connected to a computer on
which a Windows or Mac OS is installed, first install this driver software
on the computer.
Before installing the driver software
! Read Cautions on installing the software on page 7 carefully.
! Turn off this unit’s power switch, then disconnect the USB cable
connecting this unit and the computer.
! If any other programs are running on the computer, quit them.
! To install or uninstall the driver software, you need to be authorized
by the administrator of your computer. Log on as the administrator of
your computer before proceeding with the installation.
! If you connect this unit to your computer without installing the driver
software first, an error may occur on your computer depending on
the system environment.
! If installation of the driver software is interrupted after it has started,
start the installation procedure over again from the beginning.
For Mac OS X
1 When the included CD-ROM is inserted into the
computer’s CD drive, the CD drive opens on the screen.
Double-click the [CD_menu.app] icon.
! If the CD drive does not open on the screen when the CD-ROM is
inserted, use Finder to open the CD drive, then double-click the
[CD_menu.app] icon.
2 When the CD-ROM menu appears, select [Install
Driver Software(XDJ-AERO_Driver)], then click [Start].
! To close the CD-ROM menu, click [Exit].
3 Proceed with installation according to the instructions
on the screen.
For Windows
®
7, Windows Vista
®
and
Windows
®
XP
1 Insert the included CD-ROM into the computer’s CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the CD drive from [Computer (or My Computer)] in the [Start]
menu, then double-click the [CD_menu.exe] icon.