Pioneer XDJ-AERO - Manual (Page 12)

Setting the wireless LAN connections in
the access point (AP) mode
If the device to be connected supports the WPS standard, make the con-
nection settings using the WPS button, the WPS PIN or manually.
If the device to be connected does not support the WPS standard, make
the connection settings manually.
! Before starting, turn on this unit’s power.
! If connections cannot be established approximately 2 minutes after
the connection settings operations below are performed, the [WPS]
indicator turns off.
! With connection settings in the access point (AP) mode, note that
connection with the mobile device or computer is not established if
no link indicator is lit, even if the [WPS] indicator is off.
 Connecting using the [WPS] button
1 Select connection by WPS button (PBC connection)
with the WPS connection function of a mobile device or
computer.
! See your device’s operating instructions for instructions on connect-
ing using the WPS button.
2 Press this unit’s [WPS] button for over 1 second.
The [WPS] indicator flashes.
Once the setting is completed, the [WPS] indicator turns off.
 Connecting by inputting the WPS PIN code
1 Check the PIN code in the WPS connection function on
the mobile device or computer.
! See your device’s operating instructions for instructions on checking
the WPS PIN code.
2 Press the [INFO(UTILITY)] button for over 1 second.
3 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
4 Turn the rotary selector, select [INPUT WPS PINCODE],
then press the rotary selector.
5 Use the rotary selector to input the mobile device’s or
computer’s PIN code.
Once the setting is completed, the [WPS] indicator turns off.
 Connecting by manual input
1 Press the [INFO(UTILITY)] button for over 1 second.
2 Turn the rotary selector, select [WLAN
INFORMATION], then press the rotary selector.
3 Turn the rotary selector, select [SSID], then press the
rotary selector.
Make a note of the [SSID] for future reference.
! The first 11 characters of the [SSID] are displayed. Turn the rotary
selector to display the portion that is not initially displayed.
4 Press the [BACK(TOP)] button.
Press to return to the previous screen.
5 Turn the rotary selector, select [PASSWORD], then
press the rotary selector.
Make a note of the [PASSWORD] for future reference.
6 From the wireless LAN connection settings on the
mobile device or computer, display the connectable
[SSID]s.
! See your device’s operating instructions for instructions on search-
ing for or displaying connectable [SSID]s.
7 On the mobile device or computer, select the [SSID]
checked in step 3.
8 Input the password you made a note of in step 5.
Setting the wireless LAN connections in
the WLAN client mode
If the access point to which you want to connect supports the WPS
standard, make the connection settings using the WPS button, the WPS
PIN code or manually.
If the access point to which you want to connect does not support the
WPS standard, make the connection settings manually.
! Before starting, turn on this unit’s power.
! If connections cannot be established approximately 2 minutes after
the connection settings operations below are performed, the [WPS]
indicator turns off.
! Previously connected devices are connected automatically with
priority, without making the settings.
 Connecting using the [WPS] button
1 Press the access point’s WPS button.
! See your device’s operating instructions for instructions on connect-
ing using the WPS button.
2 Press this unit’s [WPS] button for over 1 second.
The [WPS] indicator flashes.
Once the setting is completed, the [WPS] indicator turns on.
 Connecting by inputting this unit’s WPS PIN code
1 Press the [INFO(UTILITY)] button for over 1 second.
2 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
3 Turn the rotary selector, select [Show PINCODE], then
press the rotary selector.
This unit’s PIN code is displayed.
Make a note of the PIN code.
4 Press the rotary selector.
The [WPS] indicator turns on.
5 With access point WPS connection settings, input the
PIN code displayed in step 3.
Once the setting is completed, the [WPS] indicator turns on.
! See your device’s operating instructions for instructions on inputting
the PIN code.
 Connecting by manual input
1 Press the [INFO(UTILITY)] button for over 1 second.
2 Check the access point’s [SSID] and password.
! See your device’s operating instructions for instructions on checking
the [SSID] and password.
3 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
4 Turn the rotary selector, select [SELECT SSID], then
press the rotary selector.
Up to 10 access points in the area are displayed.
5 Turn the rotary selector, select the [SSID] checked in
step 2, then press the rotary selector.
! If the corresponding device’s [SSID] is not displayed on the list of
access points in the area, or to specify an [SSID] that is intentionally
not displayed through use of a stealth function, etc., the device can
12 En