Panasonic KX-TG6051AL - Manual (Page 11)

Preparation
11
Battery installation/
replacement
1 Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
L
If necessary, remove the old
battery.
2 Insert the battery ( A), and press it
down until it snaps into position ( B).
Then close the handset cover ( C,
D).
Important:
L
Use only the rechargeable Panasonic
battery noted on page 5.
Battery charge
Place the handset on the base unit or
charger for 7 hours before initial use.
L
While charging, “
Charging
” is
displayed and the charge indicator on
the handset lights in amber. When the
battery is fully charged, “
Charge
completed
” is displayed and the
indicator lights in green.
Base unit:
L Model shown is KX-TG6051.
Charger:
Note:
L
If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
B
A
C
D
Available model:
KX-TG6052/KX-TG6053
Charge
contacts
Charge
contacts
TG605xAL.book Page 11 Thursday, September 27, 2007 5:49 PM