Panasonic KX-TG6051AL - Manual (Page 22)

Caller ID Service
22
– the caller’s customized name
following every ring, if the caller
information matches a phone
number stored in the handset 1
phonebook. If the handset 1 does
not have a link to the base unit
(battery is empty, for instance), the
other handset(s)
*1 and the base
unit announce the caller’s phone
number.
*1 KX-TG6052/KX-TG6053
L Usually the unit announces the
caller’s information after the 2nd ring.
Depending on your telephone service
provider, the unit may announce the
caller’s information later than usual.
L Name pronunciation may vary. This
feature may not pronounce all names
correctly.
L
Usually the unit announces the
caller’s information after the 2nd ring.
If you turn on the answering system
and set the ring count to “
2
” (page
34), the unit does not announce the
caller’s information. If “
Toll saver ”
is selected and there is a new
message, the unit does not announce
the caller’s information.
L Your unit may mute one or more rings
in order to announce the caller’s
information. Talking Caller ID takes
precedence over ringing.
L The announcement is heard at the
ringer volume (page 15 , 28).
L This feature can be turned on or off
(page 28).
L
For users in name display service
available areas:
– The unit announces the Caller ID
name provided by your telephone
service provider.
– The unit announces the customized
phonebook entry name for numbers
stored in the handset 1 phonebook.
– Caller ID service has a limit of how
many characters can be displayed.
If a caller’s name is too long, the
handset may not be able to display
or announce the entire name.
Ringer ID/Light-up ID
This feature can help you identify who is
calling by using different ringers and
ringer indicator colours for different
callers stored in the phonebook. You
can assign a different ringer and
indicator colour to each phonebook
item. When a call is received from a
caller stored in the phonebook, the
assigned ringer rings and the assigned
ringer indicator colour flashes after
Caller ID information is displayed.
If you select “
No Ringer ID
” (default)
or “
No Light-up ID
” (default), the
handset uses the ringer tone or ringer
indicator colour you selected on page
27 when a call is received from that
caller.
L
The ringer and indicator colour may
be changed after the 2nd ring.
1 Find the desired item (page 19). i
{
Option}
2 To assign a ringer:
{V}
/{^}: Select “ Ringer ID ”. i
{ Select}
To assign a ringer indicator colour:
{V}
/{^}: Select “
Light-up ID
”. i
{ Select}
3
{V}
/{^}: Select the desired setting.
4
{
Save} i {OFF}
TG605xAL.book Page 22 Thursday, September 27, 2007 5:49 PM