Panasonic KX-TG6051AL - Manual (Page 34)

Answering System
34
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
L
The unit answers your call with the
greeting message.
L You can hang up, or if you call from
a touch tone phone, you can enter
your remote code and begin
remote operation (page 33).
Skipping the greeting
message to leave a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press {*} to skip the greeting
message and record your message
after the beep.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorised parties from listening to
your messages remotely. The default
setting is “
11
”.
1
{ MENU} i {0}{6}{3}
2 Enter the desired 2-digit remote
code. i {Save} i {OFF}
Ring count
You can change the number of times
the phone rings before the unit answers
calls.
The default setting is “
4
”.
“
Toll saver
”: The unit answers on
the 2nd ring when new messages have
been recorded, and on the 4th ring
when there are no new messages. If
you call your phone from outside to
listen to new messages (page 33), you
will know that there are no new
messages when the phone rings for the
3rd time. You can then hang up without
being charged for the call.
1
{ MENU} i {0}{6}{1}
2
{V}
/{^}: Select the desired setting.
3
{ Save} i {OFF}
For Service Provider Voice Mail
Subscribers
To receive Voice Mail and use
answering system properly, please note
the following:
L
“Voice Mail” is a service provided by
your service provider/telephone
company. You will need to first
TG605xAL.book Page 34 Thursday, September 27, 2007 5:49 PM