Panasonic KX-TG6051AL - Manual (Page 43)

Useful Information
43
*1 KX-TG6052/KX-TG6053
Troubleshooting
General use
Programmable settings
Store VM access# L You have not stored the Voice Mail access
number. Store the number (page 36).
Problem Cause/solution
The unit does not work. L Make sure the battery is installed correctly and
fully charged (page 11).
L Check the connections (page 10).
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset has not been registered to the
base unit. Register the handset (page 47).
I cannot hear a dial tone. L Confirm the telephone line cord is properly
connected (page 10).
L
Disconnect the unit from the telephone line and
connect a known working telephone. If the
working telephone operates properly, contact
our service personnel to have the unit repaired.
If the working telephone does not operate
properly, contact your service provider/
telephone company.
The communication
between the base unit and
the handset is unstable. L The handset may not be properly registered. Try
to re-register the handset (page 47).
The indicator on the top
right of the handset flashes
slowly.
L
New messages have been recorded. Listen to
the new messages (page 31).
L New Voice Mail messages have been recorded.
Listen to the new Voice Mail messages (page
36).
Problem Cause/solution
I cannot program items. L Programming is not possible while either the
base unit or another handset is being used. Try
again later.
Display message Cause/solution
TG605xAL.book Page 43 Thursday, September 27, 2007 5:49 PM