Panasonic KX-TG6051AL - Manual (Page 23)

Caller ID Service
23
Caller list
Viewing the caller list and
calling back
1
{ View CID}
2 Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
3 To call back, press {C}.
To exit, press {OFF}.
Note:
L
If you do not want to dial the area
codes when making calls from the
Caller ID list, you can store the area
codes which you want the unit to
delete automatically (page 23).
L KX-TG6052/KX-TG6053:
Each handset has its own caller list.
The number of missed calls may differ
between handsets. Even if you
viewed the caller list or answered a
call on one handset, the same
information is still recognized as a
missed call in the other handsets.
L
A Q is displayed in caller information
which has already been viewed or
answered.
L If an arrow (→ ) is displayed after the
number, the whole phone number is
not shown. Press {>} to see the
remaining numbers. To return to the
previous display, press {<}.
Storing your area code
We recommend storing your area code
before using Caller ID (page 21). Calls
from the same area will be recorded in
the caller list without the area code. You
do not have to remove it before calling
back the caller or storing in the
phonebook.
1
{ MENU} i {0}{4}
2 Enter your area code (max. 8 digits).
L
To correct a digit, press {<} or {>}
to move the cursor, then press
{
Clear}. Enter the correct number.
3
{
Save} i {OFF}
To erase your area code
Press and hold {Clear} in step 2, press
{
Save}, then press {OFF}.
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list.
1
{
View CID}
2
{V} /{^}: Select the desired item. i
{ Select} i {Edit}
3 Add or erase digits to the beginning
of the number as necessary.
L
To add a digit, press the desired
dial key.
L To erase a digit, press {Clear} or
{#}
.
4
{C}
Note:
L
The edited phone number is not
saved in the caller list.
TG605xAL.book Page 23 Thursday, September 27, 2007 5:49 PM