Panasonic KX-TG6051AL - Manual (Page 15)

Making/Answering Calls
15
Making calls
1 Dial the phone number.
L
To correct a digit, press {Clear}.
2 Press {C} or {Call}.
3 When you finish talking, press {OFF}
or place the handset on the base unit
or charger.
Note:
L
“ Line in use ” is displayed when
someone is talking on the handset or
another phone.
Using the speakerphone
1 Dial the phone number, and press
{s}
.
L Speak alternately with the other
party.
2 When you finish talking, press
{
OFF}.
Note:
L
Use the speakerphone in a quiet
environment.
L To switch to the receiver, press {C}.
Adjusting the receiver/speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialled are
stored in the redial list (each 48 digits
max.).
1
{ REDIAL}
2
{V} /{^}: Select the desired phone
number.
3
{C}
Erasing a number in the redial list
1
{ REDIAL}
2
{V} /{^}: Select the desired phone
number.
3
{ Erase} i {Yes} i {OFF}
PAUSE button (for PBX/long
distance service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 20).
For example, if you need to dial the line
access number “9” when making
outside calls with a PBX:
1
{
9} i {PAUSE} i Dial the
phone number.
2
{C}
Note:
L
A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
TG605xAL.book Page 15 Thursday, September 27, 2007 5:49 PM