Planar C3013T - Manual (Page 35)

Touch Panel Base Address
This option configures the touch panel serial port base address. The choices for I/O base address-
es are: Disabled; 3F8H; 2F8H; 3E8H; and 2E8H. The default is Disabled.
Touch Panel IRQ
This option is used to configure the touch panel serial port IRQ. The IRQ choices are: Disabled;
IRQ3; IRQ4; IRQ5; IRQ7; IRQ9; IRQ10; and IRQ11. The default is Disabled.
Local Bus IDE Adapter
This option enables or disables the onboard PCI bus IDE hard disk controller. The default is
Enabled.
24 Planar Clean Screen PC User’s Manual
CS Manual LAYOUT#1787 3/9/98 5:33 PM Page 24