Pioneer AVIC-D1 - Manual (Page 62)

60
Chapter 4
Editing the Navigation Utilities
NAVI
Setting the Vehicle Dynamics
Display
You can change the values displayed by the
instruments on the left and right of the Vehicle
Dynamics Display.
Until the sensor’s initial learning is complete,
only the voltage and clock are available.
1
Switch to the Vehicle Dynamics Display.
➲ Changing the map display mode ➞
Page 29
2
Touch the left or right instrument.
Touch keys are displayed.
3
Touch the items you want to display.
You can select the following items.
Voltage :
Displays the power supply and voltage sup-
plied from the battery to this system.
Acceleration :
Acceleration in a forward direction is dis-
played. The + sign indicates acceleration
while the – sign indicates deceleration.
Side Acceleration :
Acceleration in a side direction such as when
turning, is displayed. The + sign indicates a
right turn, while the – sign indicates a left
turn.
Angular Velocity :
Displays the vehicle’s turning angle over one
second (how far it has turned in a second).
Slope :
Displays the vehicle’s vertical movement. The
+ side represents the rising angle, and the -
side the falling angle.
Direction :
The direction your vehicle is traveling in is dis-
played.
Clock :
Current time is displayed.
Adjust Look :
Touch “Adjust Look” to display a screen for
selecting the panel pattern. Touch one of the
patterns from among those displayed
onscreen to change the panel to the selected
pattern.
❒ If you touch “Peak Hold Reset”, the maxi-
mum and minimum (green line) values
indicated in “Acceleration” and “Side
Acceleration” are reset.
❒ You cannot change the speedometer at the
center.
❒ Selecting Demo mode in the Settings
menu enables you to perform a demon-
stration with random values.
Checking the Navigation Status
The navigation status, including the driving sta-
tus of a vehicle, positioning status by satellite,
learning status of the 3D sensor, and cable con-
nection status can be checked.
Checking sensor learning status
and driving status
1
Touch “Settings” in the Main menu, then
touch “Hardware Info”.
2
Touch “3D Calibration”.
The 3D Calibration screen appears.
(1) Distance
Driving distance is indicated.
(2) Speed Pulse
Total number of speed pulses is indicated.
(3) Learning Status
Current driving mode is indicated.
(4) Degree of learning
Sensor learning situations of distance
(Distance), right turn (Right Turn), left turn
(Left Turn), and 3D detection (3D Detection)
are indicated by the length of bars.
(1)
(2)
(3)
(4)
(5) (7) (6)