Pioneer AVIC-D1 - Manual (Page 89)

87
Chapter 7
Using the AV Source (Pioneer AV Equipment)
AV
1
Touch the source icon and then touch
“XM” to select the XM.
2
Touch “BAND” to select a XM band.
Touch “BAND” repeatedly until the desired
XM band is displayed, XM1, XM2 or XM3.
3
To perform tuning, touch or .
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
If you keep touching or , you can
increase or decrease channel number contin-
uously.
You can also perform manual tuning by mov-
ing the joystick left or right.
You can also perform tuning within selected
channel category.
➲ Selecting the channel in the channel cate-
gory
➞ Page 87
Switching the XM display
1
Touch .
Each touch of changes the information as
follows:
Channel name — Artist name/feature — Song/
program title — Channel category
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1 —
P6 you can easily store up to six broadcast sta-
tions for later recall with the touch of a key.
1
When you find a station that you want to
store in memory keep touching a preset
tuning key P1 — P6 until the XM preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you touch the same preset tun-
ing key P1 — P6 the station is recalled from
memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
❒ Up to 18 stations, 6 for each of three XM
bands can be stored in memory.
❒ You can also use the following operations
to recall stations assigned to preset tuning
keys P1 — P6.
• Using or
in the detail information display
when the “CH NUMBER” mode is selected.
• Moving the joystick up and down when the
“CH NUMBER” mode is selected.
Switching the XM channel
select mode
You can switch if you select a channel with a
channel number or within a selected category
when you select a channel.
1
Touch “MODE” to select the desired
channel select setting.
2
Touch “MODE” repeatedly to switch between
the following channel select settings:
CH NUMBER (channel number select mode)
— CATEGORY (channel category select
mode)
Selecting a channel in the chan-
nel category
1
Touch “MODE” to select the CATEGORY
mode.
2
Touch or to select the desired chan-
nel category.
3
Touch or to select the desired
channel in the selected channel category.
❒ You can also perform steps 2 and 3 by
using the joystick.
Selecting a XM channel directly
➲ Refer to page 84
Display the Radio ID
➲ Refer to page 85
XM (GEX-P910XM)