Storing and recalling broadcast frequencies 77, Storing the strongest broadcast frequencies, Tuning in strong signals – Pioneer AVIC-D1 User Manual

Page 79: Storing and recalling broadcast frequencies

Advertising
background image

77

Chapter 6

Using the AV Source (Built-in CD Drive and Radio)

AV

Storing and recalling broadcast
frequencies

If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily
store up to six broadcast frequencies for later
recall with the touch of a key.

1

When you find a frequency that you want
to store in memory keep touching a preset
tuning key P1 — P6 until the preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.

2

The next time you touch the same preset
tuning key P1 — P6 the radio station fre-
quency is recalled from memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
❒ Up to 18 FM stations, 6 for each of the

three FM bands, and 6 AM stations can be
stored in memory.

Storing the strongest broadcast
frequencies

BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under preset tuning keys P1P6 and once
stored there you can tune in to those frequencies
with the touch of a key.

1

Touch “BSM” in the FUNCTION menu.

2

Touch “START” to turn BSM on.
BSM
begins to flash. While BSM is flashing
the six strongest broadcast frequencies will
be stored under preset tuning keys P1P6
in order of their signal strength. When fin-
ished, BSM stops flashing.
To cancel the storage process, touch
STOP”.
❒ Storing broadcast frequencies with BSM

may replace broadcast frequencies you
have saved using P1P6.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.

1

Touch “LOCAL” in the FUNCTION menu.

2

Touch “ON” to turn local seek tuning on.
To turn local seek tuning off, touch “OFF”.

3

Touch or to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 — 2 — 3 — 4
AM: 1 — 2
The four setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.

Preset tuning keys (P1 — P6)

RADIO

Advertising