Pioneer AVIC-D1 - Manual (Page 86)

84
Chapter 7
Using the AV Source (Pioneer AV Equipment)
AV
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you touch the same preset tun-
ing key P1 — P6 the station is recalled from
memory.
❒ Up to 18 stations, 6 for each of three XM
bands can be stored in memory.
❒ You can also use the following operations
to recall stations assigned to preset tuning
keys P1 — P6.
• Using “UP” or “DOWN” in the detail informa-
tion display when the “ALL CH” mode is
selected.
• Moving the joystick up and down when the
“ALL CH” mode is selected.
Selecting a channel in the chan-
nel category
1
Touch “MODE” to select the CATEGORY
mode.
2
Touch “UP” or “DOWN” to select the
desired category.
❒ You can also select the category by moving
the joystick up and down.
3
Touch or to select the desired
channel within the selected category.
Selecting a channel from the XM
channel list display
The list content can be switched so you can
search for the track you want to listen to not only
by the channel name but also by the artist name
or song title.
❒ The channel list shows all the channels dur-
ing the “ALL CH” mode, and the channels
included in the selected category during the
“CATEGORY” mode. To switch the channel
mode, touch “MODE”.
1
Touch “LIST”.
XM channel list appears in the display.
Each touch of the “LIST” changes the set-
tings as follows:
Detail information display or Preset list
display — Ch Name List (Channel name) —
Song Title List (Song title) — Artist Name
List (Artist name)
2
Touch the desired channel that you want
to listen to.
Press or to switch to the next page or
previous page.
❒ During the CATEGORY mode, press
“UP” or “DOWN” to switch to another cat-
egory.
Selecting a XM channel directly
You can select a XM channel directly by entering
the desired channel number.
1
Touch “DIRECT”.
CHANNEL INPUT appears in the display.
2
Touch 0 — 9 to input the desired channel
number.
To cancel the input numbers, touch
“CLEAR”.
3
While the input number is displayed,
touch “ENTER”.
The entered XM channel is selected.
4
Touch “Back”.
You can return to the previous display.
Using the MyMix function
The MyMix function memorizes the song title and
artist name of the song currently being received.
When the track that matches the memorized
song title and artist name is being broadcasted
on a station other than the one you are listening
to, you will be alerted, and you can switch the sta-
tion to listen to that song.
❒ A track itself is NOT downloaded BUT only the
song title and the artist name are memorized.
XM (GEX-P10XMT)