Palm Tungsten W - Manual (Page 120)

Chapter 11 Using Palm™ Mobile
106
Using your hands-free headset
Your handheld functions as a mobile phone using a hands-free headset. The
headset enables you to answer and end calls.
The headset cable connects to the jack at the upper-left of the handheld. Once the
jack is connected and the earpiece speaker is placed in your ear, you can answer
and end calls by using the button on the headset microphone.
The button on the headset microphone changes function according to the call
status:
To use the hands-free headset:
1. Insert the headset connector into the voice jack.
Mobile radio off
or
Mobile radio on-–
no calls Short press: Opens Palm Mobile and cycles through screens.
Long press: Continuous cycling through Palm Mobile screens.
Mobile radio on-–
phone ringing Short press: Answers call.
Long press: Ignores the call and sends the call to voicemail.
Mobile radio on-–
active call in
session Short press: If you are currently in another application, returns
you to Palm Mobile Active Call screen. If you are in Palm
Mobile, cycles to the next application screen.
Long press: Ends currently active call.
Mobile radio on-–
active call in
session and
phone is ringing Short press: If you are currently in another application, returns
you to Palm Mobile Active Call screen. If you are in Palm
Mobile, cycles to the next application screen.
Long press: Ignores the call and sends the call to voicemail.
Button
Headset jack
Microphone
Earpiece speaker