Palm Tungsten W - Manual (Page 82)

Chapter 5 Using Address Book
68
Tap-to-Connect
Tap-to-Connect enables you to select an entry and initiate a related task by tapping
it with the stylus. By default, Tap-to-Connect is enabled.
To enable Tap-to-Connect:
1. Press Command Stroke + R.
Alternately, press Function + Menu , and then select Preferences on the
Options menu.
2. Tap Enable Tap-to-Connect.
3. Tap OK.
TIP You can also configure which application opens when you tap a specific Address
record field, and whether to add a prefix to all phone numbers. See “Quick Connect”
earlier in this chapter to learn how to configure these settings.
To make a connection with Tap-to-Connect:
1. From the Address list, tap the entry to which you want to connect.
2. Tap the item you want to launch in Mobile.
For example, to dial a phone number, tap the number you want to dial. To
address an e-mail message, tap an e-mail address.