Palm Tungsten W - Manual (Page 316)

Chapter 20 Performing HotSync ® Operations
302
4. Click the Network tab and make sure your user name has a checkmark next to
it. If the checkmark is not there, click the check box next to your user name.
5. Click OK.
6. Put your handheld in the cradle/cable, and perform a HotSync operation.
The HotSync operation records network information about your computer on
your handheld. With this information, your handheld can locate your computer
when you perform a HotSync operation over the network.
To prepare your handheld for a network HotSync operation:
1. Press Home .
2. Select the HotSync icon .
3. Press Command Stroke + O.
Alternately, press Function + Menu , and then select Modem Sync
Prefs on the Options Menu.
4. Tap Network.
5. Tap OK.