Palm Tungsten W - Manual (Page 389)

Installing and removing the SIM card
375
3. Do one of the following:
– If a placeholder card is present, remove the placeholder card. Then slide the
SIM card into place on the access door. Close the access door.
– If the SIM card is present (look for the gold contact area), close the access
door.
To remove the SIM card:
1. Turn off the handheld.
IMPORTANT Turn off the handheld before opening the access door and removing
the SIM card. This prevents any static discharge and damage to the connector.
2. On the back panel of your handheld, slide your thumbnail into the indent and
under the access door until the access door is released.
After removing the placeholder card,
slide the SIM card into place on the
access door
SIM card